Setup For Queue-Based Printing Over Ipx/Spx (Remote Printer Mode) - Axis 5470e User Manual

AXIS 5470e User's Manual
Important!

Setup for Queue-based printing over IPX/SPX (Remote Printer Mode)

In order for the print server to log in using the IP protocol,
RCONAG6.NLM has to be loaded to a specified tree. If you have
multiple trees, make sure that one file server in the specified tree
has RCONAG6.NLM loaded.
If you don't have a PSERVER created on the file server, start out with
creating one in the NetWare Administrator, as described here:
1. Start the NetWare Administrator.
2. Choose Tools | Print Services Quick Setup (Non-NDPS).
3. In the Print Services Quick Setup (Non-NDPS) dialogue, choose
a name for the print server, printer and queue object. Choose
'parallel' as the printer type and Postscript as the Banner type.
Click Create.
4. Log into the AXIS 5470e web interface and choose admin |
Network Settings | Detailed View | NetWare and write the name
of the print server you just created together with its slot number
in the NPRINTER/RPRINTER1-field (the slot number is the number
dedicated to the printer you have just created).
5. Click OK when done.
6. Use RCONSOLE or go to the file server console where you have
created the object, load PSERVER.NLM and choose the print server
you have just created.
7. From the available options, choose 'Printer Status', choose your
newly created printer object and check that the status of the
attached queue is 'Waiting for job'.
Section 6: Setting Up - NetWare
101