Upgrading The Firmware Software - Axis 5470e User Manual

AXIS 5470e User's Manual

Upgrading the firmware Software

Upgrading using
AXIS ThinWizard
You can upgrade the AXIS 5470e Flash memory using one of the
following methods:
• AXIS ThinWizard (TCP/IP)
• FTP (TCP/IP)
Note:
Updating instructions are also supplied with the software update.
AXIS ThinWizard is a tool that enables batch upgrading of several
print servers and should be used for upgrading the flash memory in
TCP/IP networks.
You must assign the AXIS 5470e with an IP address, as described in
Assigning an IP address, on page 20, before you can use this
upgrading method.
Follow the instructions below to upgrade your print servers using
AXIS ThinWizard:
1. Click the Manage Network button in the AXIS ThinWizard main
menu.
2. Select a network group from the drop-down list. You can only
update the servers that are included in the selected network
group.
3. All AXIS servers included in the network group appear. Click the
Firmware button to start the Upgrade Wizard.
4. Follow the instructions that are presented to you to complete the
installation.
Refer to Using AXIS ThinWizard for Print Server Management, on page
141, for more information about AXIS ThinWizard.
Section 14: Upgrading the software
181