Setting Up - Netware; Section 6 Setting Up - Netware - Axis 5900 User Manual

58

Section 6 Setting Up - NetWare

Section 6
Installation
method
NDPS
Printer
Configuration
method
PSERVER mode
Remote Printer
mode

Setting Up - NetWare

This section describes how to continue the installation of the
AXIS 5900 in the NetWare environment. Identify which
transport protocol you are running on your network and which
installation method you should use. Continue the installation by
selecting the appropriate installing instructions from the table
below:
Transport protocol
TCP/IP
IPX/SPX
Transport protocol
IP/IPX
IPX/SPX
If you intend to operate your AXIS 5900 in a multi-protocol,
mixed environment, you should also proceed to the other
relevant sections in this manual, namely:
Section 5 Setting Up - Windows, on page 35
Section 7 Setting Up - Macintosh, on page 66
Section 8 Setting Up - UNIX, on page 73
Note:
Installation instructions for Windows 3.1, WfW and OS/2 are found on
www.axis.com and the AXIS Network Product CD.
Action
See Setup using NDPS, on page 59
Proceed with Installing the AXIS 5900 in an NDPS environments, on page 59.
Action
See Setup using Queue-based printing over IP/IPX in PSERVER Mode, on page 61 and
then
Queue-based Printing Methods, on page 64
See Setup for Queue-based printing over IPX/SPX (Remote Printer Mode), on page 63
and then
Queue-based Printing Methods, on page 64
AXIS 5900 User's Manual