Axis 5470e User Manual page 172

172
Section 13: Using Logical Printers
Adding Strings Before
and After Print Jobs
These string functions provide a way to send printer control
commands before and after each print job. They may be specified
individually for each logical printer.
All strings are entered as hexadecimal byte values.
Example:
Assume that the logical printer PR5 is configured as a PostScript
printer and that you want to append the PostScript End of File
character (hex
Follow the instructions below to add a string after the print job:
1. Click admin and the Logical Printer Settings button.
2. Select the PR5 tab.
3. Enter the string 04 in the String After Print Job text field.
4. Click OK.
Example:
You have an HP LaserJet printer with dual input bins, and want to
print on pre-printed forms when using the logical printer PR4. The
standard forms are taken form bin 1, and the pre-printed forms are
taken from bin 2. The string before print job should contain the
command to select bin 2,
string after print job should contain the command to select bin 1,
E
l1H
C
(hex
1B 26 6C 31 48
Follow the instructions below to add strings before and after the
print job:
1. Click admin and the Logical Printer Settings button.
2. Select the PR4 tab.
3. Enter the string 1B 26 6C 34 48 in the String Before Print Job
text field.
4. Enter the string 1B 26 6C 31 48 in the String After Print Job
text field.
5. Click OK.
) after each print job.
04
(hex
E
l4H
C
).
AXIS 5470e User's Manual
), and the
1B 26 6C 34 48