Axis 5470e User Manual page 82

Section 5: Setting Up - IBM Mainframe
82
From an TSO session, enter the following command:
TSO PING <IP_address>
Note:
The IP address is the IP address of the AXIS 5470e.
In JES2, enter the following command from the System Display and
Search Facility (SDSF) menu 6:
ping <IP_address>
Note:
The IP address is the IP address of the AXIS 5470e.
Here is an example of a successful ping:
EZA0458I Ping V3R1:
(Use ATTN to interrupt.)
EZA0463I PING: Ping #1 response took 0.055 seconds
Successes so far = 1
And here is an example of an unsuccessful ping:
EZA0458I Ping V3R1:
(Use ATTN to interrupt.)
EZA0464I PING: Ping #1 timed out
If the ping is not successful make sure the AXIS 5470e is configured
according to the instructions in Assigning an IP address, on page 20
and in Configuring the AXIS 5470e, on page 65. If these items are
all in order, consult your TCP/IP network administrator.
AXIS 5470e User's Manual
Pinging host 10.50.45.200
Pinging host 10.50.45.200