Axis 5470e User Manual page 196

196
Section 17: Extended IBM Printer Emulation
Before the bar codes can be printed, a bar code format has to be
defined. This format sets the type and size of the bar code to be
printed. Up to 16 formats can be predefined. The definitions are made
by setting up the BAR parameter.
The BAR parameter takes several arguments, separated by commas,
as shown below:
BAR <number>=<type>,<width>,<height>,<text mode>,
<check mode>;
number is the bar code definition number in the range 0–15. This
•
number is used to refer to the definition when printing the bar
code.
type is the predefined bar code type. Valid values are:
•
Value Description
CODE39
UPCA UPC version A
EAN8
EAN13
width is the bar code module width in 1/1000 inch. Valid range is
•
1 to 1000. The default value is 12.
• height is the bar code element height in 1/24 inch. Valid range is
1 to 500. The default value is 12.
text mode selects if human readable text is printed under the bar
•
code or not. 'YES' or 'ON' will turn on text, 'NO' or 'OFF' will turn
off text. The default mode is 'ON'.
check mode selects if a check digit will be generated or not. 'YES'
•
or 'ON' will generate a check digit, 'NO' or 'OFF' will not generate
a check digit. The default mode is 'ON'. The check digit will
always be generated for bar code types UPCA, EAN8 and EAN13,
regardless of the setting of check mode.
AXIS 5470e User's Manual
Value
Code 39 CODE128
INT2OF5
EAN-8 CODABAR
EAN-13
Description
Code 128
2 of 5 Interleaved
Codabar matrix