Axis 5470e User Manual page 85

AXIS 5470e User's Manual
PRTnnnn Statement
CKPTPAGE
CLASS
FSS
MARK
MODE
The parameters create JES2 default values that are used
PRTnnnn
unless other values are specified in the application program JCL. The
statement contains the following parameters:
PRTnnnn
Explanation
Specifies the number of pages between data-set checkpoints. If checkpoint intervals are too frequent, printer
performance is significantly reduced. If intervals are too infrequent, and a PSF error occurs, the job has to be
reprocessed from the last checkpoint. In this case, printer performance is significantly reduced if PSF errors
continue to occur. The recommended starting value is 100.
Specifies the output classes processed by the printer. By defining print classes you can handle disabled
mechanisms.
Specifies the FSS for this device and must match the FSA name specified in the corresponding FSS statement.
This parameter is required.
Enables form markings to be placed on the job trailer pages. For the AXIS 5470e you should set this
parameter to NO.
Note: This parameter is new in JES2 and replaces the MARK | NOMARK parameter.
Specifies that the printer is managed by an FSS. This parameter is required.
Section 5: Setting Up - IBM Mainframe
85