Axis 5470e User Manual page 89

AXIS 5470e User's Manual
Device Statement Explanation
Specifies:
1. The device address (host-connected, channel-attached, non-SNA printers only). Do not specify a device
address for the AXIS 5470e when using TCP/IP attachment.
2. The name of the processor to which the device is attached
JUNIT
3. A destination class for messages about the device
4 .Whether the device is initially online or offline
This parameter is required.
MODE Specifies that the printer is managed by an FSS. This parameter is required.
Specifies which data-set processing mode is supported. For the AXIS 5470e attached to Postscript printers, the
PM
correct setting is
printed.
Specifies the print output class that the printer is to process. You may want to consider handling disabled
WC
mechanisms by defining print classes.
Section 5: Setting Up - IBM Mainframe
PRMODE=(LINE,PAGE,)
, indicating that composed-page and line data sets can be
89