Axis 5470e User Manual page 174

174
Section 13: Using Logical Printers
Character Set
Conversion
Example:
Assume that you want to replace the UNIX New Line (hex
ASCII NewLine (hex
(hex
1B 47 31
Follow the instructions below to substitute command strings:
1. Click admin and the Logical Printer Settings button.
2. Select the PR2 tab.
3. Enter the string 01 0A 02 0D 0A 03 1B 47 31 02 1B 59 in the
String Substitutions text field.
4. Click OK.
Note:
Extensive use of string substitutions will decrease the throughput rate of the
AXIS 5470e.
A common problem in a multiple host environment is that different
hosts use different ASCII character sets. As a result of this, language
specific characters (such as å ü ô ñ) are sometimes printed
incorrectly.
The AXIS 5470e solution to this problem is to assign a character set
conversion filter to a logical printer, and then link that logical printer
to the host causing the problem.
), and the printer command
0D 0A
) with (hex
E
Y 1B 59
C
Hex code
Explanation
01
0A
02
0D 0A
03
1B 47 31
02
1B 59
AXIS 5470e User's Manual
) for logical printer PR2.
length of the UNIX New Line command
the UNIX New Line command
length of the ASCII New Line command
the ASCII New Line command
length of the replaced printer command
the replaced printer command
length of the new printer command
the new printer command
) with an
0A
E
G1
C