Axis 5470e User Manual page 109

AXIS 5470e User's Manual
3. Choose an appropriate printer driver for your printer from the
Manufacturers and Printer Models list displayed and then
proceed directly to step 6. Please note that it is only necessary to
perform steps 4 - 5 if your printer does not appear in the model
list.
Note:
Even if the desired printer is available in the Manufacturer and Printer Models
list, you are advised to use the printer driver provided with your printer. This
assures you of the latest driver software.
4. Select Other... in the driver list. Insert the printer driver
diskette/CD that was provided with your printer, select the
appropriate diskette/CD drive and click OK.
5. Select the printer driver you want to install.
6. Select Other... in the "Print to" list box.
7. Select Axis Port from the list of available Print Monitors and
click OK.
8. Select the AXIS Port you wish to add and then click OK. The port
appear as <name>.LP1, where <name> is AX followed by the last
six digits of the AXIS 5470e serial number, e.g. AX100086
(default serial no).
9. Click on Settings. Choose whether error condition pop-up
messages are to be displayed by checking the box in the
Configure Axis Ports dialog. Click OK.
10. Click OK.
Section 7: Setting Up - Windows
109