Axis 5470e User Manual page 87

AXIS 5470e User's Manual
FSSDEF Statement Explanation
TYPE
Specifies that the FSS is an output writer for deferred printing. This parameter is required.
FSSNAME
Specifies the unique name of a particular FSS. This parameter is required.
Specifies a procedure for starting a specific PSF FSS. The procedure, which must be defined before the FSS is
started, is a member of the procedure library defined by the
statement or of the IATPLBST procedure library. Different FSSDEF initialization statements can refer to the same
PNAME
startup procedure.
The
procedures.
Specifies the JES3 processor on which the FSS is run. The name must match the
SYSTEM
MAINPROC
Specifies the way that the FSS is terminated. The parameter value
TERM
the JES3 global address space is terminated by a
Device Statement Explanation
Specifies the JES default page definition.
The value
procedures.
The value
CARRIAGE
procedures.
The value
definition is to be used as default. The name specified here, or the JES3 system default, is
the PSF default page definition.
FSSDEF Statement:
The FSSDEF initialization statement is optional but recommended. If
it is omitted, JES3 generates a default FSS for the printer being
invoked.
The FSSDEF statement can contain the following parameters:
parameter specifies either a startup procedure supplied with PSF, or one of your organization's
PNAME
statement for the processor.
DEVICE Statement:
A DEVICE statement is required for each printer. The DEVICE
parameters create JES3 default values that are used unless other
values are specified in the JCL application program. The DEVICE
statement can contain the following parameters:
specifies that the page definition can be changed during startup
YES
specifies that the page definition cannot be changed during startup
NO
specifies that the un-prefixed name, 1 to 4 characters long, of the page
aaaa
Section 5: Setting Up - IBM Mainframe
parameter of the STANDARDS
STCPROC
indicates that the FSS is terminated if
YES
or operator command.
*RETURN *DUMP
parameter in the
NAME
87