Axis 5470e User Manual page 100

100
Section 6: Setting Up - NetWare
Installing the
AXIS 5470e in IP/IPX
Follow the instructions below:
1. From the AXIS 5470e internal web pages, go to admin |
Network Settings | NetWare.
2. Set the NDS mode parameters on the NetWare page:
• PSERVER NDS Tree (example: NW5TREE)
or
PSERVER NDS File Server: (example: FILESERVERNAME)
• PSERVER NDS Distinguished Name:
(example: AXISXXXXXX.<context>, where <context> is the
container where you want to create your print server)
3. Click OK when finished.
4. Use the NetWare Administrator to create the printer, print server
and queue objects in the NDS tree and then link them together.
The Print Services Quick Setup (Non-NDPS) utility can be used for
this. Go to Tools in the NetWare Administrator.
5. Use the Add Printer Wizard on your work station to install the
printer on your client.
Additional configuration and management can be performed from
any standard Web browser. Please refer to Using a Web browser, on
page 135.
Notes:
• If both the IPX and IP protocols are enabled in your network and the print
server uses DUAL_STACK (enabled by default) as its network transport
protocol, then IPX will be chosen. To force the print server to use the IP
transport protocol, go to your print server's web interface and choose Admin |
Detailed View | NetWare and change the NetWare Transport Protocol from
DUAL_STACK to IP_ONLY. Save and exit when finished.
• Pure IP requires that you run NetWare 5 or higher.
AXIS 5470e User's Manual