Axis 5470e User Manual page 57

AXIS 5470e User's Manual
Sample Sessions
2. Add the Print Server PU and LU definitions to the major node
definition.
For Switched Major Node definitions you need to:
• Add the IDBLK (default = E07) and IDNUM (default =
last 5 digits of the AXIS 5470e MAC address) entries
to the PU definition.
• Code a PATH definition using the unit's full 12 digit
MAC address.
Example: AnAXIS 5470e with a MAC/node address
of
00408C100086
PA5470e1
GID=1, FID=1, GRPNM=gggggg
Note:
'GRPNM' specifies the symbolic name of a GROUP statement in an NCP major
node. That GROUP statement defines a logical group of SDLC switched lines or
token-ring switched lines.
3. Make sure that the corresponding VTAM Logon-mode entries
are available and that the appropriate LU session types (LU1 or
LU3) are used.
4. Vary ACTive the VTAM Major Node definition for the
AXIS 5470e.
The examples below are based on samples given in VTAM
Customization (IBM part no: SC23-0112), with some changes to
optimize use for AXIS 5470e.
VTAM for MVS is assumed, although the configuration for VM and
VSE is similar.
Section 5: Setting Up - IBM Mainframe
will be defined as:
PATH DIALNO=010400408C100086,
57