Axis 5470e User Manual page 175

AXIS 5470e User's Manual
Example:
ASCII to Postscript
Conversion
Example:
You select your desired conversion filter by setting the Character Set
Conversion (PRx_CSET) parameter. The output from the conversion
filter is always IBM PC Set 2 (Code Page 437), and this is the
character set the printer must be set up for.
Your network contains a host using the character set ISO 8859-2. In
order to direct itsprint jobs to the printer connected to the AXIS
5470e, you should assign thehost to a separate logical printer, and
install a character set conversion filter.
Follow the instructions below to change the conversion filter:
1. Click admin and the Logical Printer Settings button.
2. Select the PR1 tab.
3. Set the parameter Character Set Conversion to ISO>IBM.
4. Click OK.
The ISO 8859-2 printer data that is sent to logical printer PR1 is
converted to IBM PC Set 2.
The ISO 8859-2 printer data that is sent to logical printer PR1 is
converted to IBM PC Set 2.The ISO 8859-2 printer data that is sent to
logical printer PR1 is converted to IBM PC Set 2.
The AXIS 5470e logical printers can translate ASCII print data into
PostScript format. This makes it possible to print with a PostScript
printer from a host that does not support PostScript. The conversion
is selected by activating a filter that converts ASCII data into
Postscript. This filter can be activated individually for each logical
printer.
Activate your desired filter by setting the Printer Language
Translation (PRx_FILT) parameter.
Follow the instructions below to convert ASCII print data to
PostScript for logical printer PR2:
1. Click admin and the Logical Printer Settings button.
Section 13: Using Logical Printers
175