Setting Up - Netware - Axis 560 User Manual

AXIS 560/660 User's Manual
Section 4 Setting Up - NetWare
Installation
method
NDPS
Queue based
printing
This section describes how to continue the installation of the AXIS
560/660 in the NetWare environment. Identify which transport
protocol you are running on your network and which installation
method you should use. Continue the installation by selecting the
appropriate installing instructions from the table below:
Transport
Action
protocol
TCP/IP See Setup using NDPS, on page 44
IPX/SPX Proceed with Installing the AXIS 560/660 in NDPS environments, on page 45.
If you have performed the basic installations as described in Basic Setup
IPX/SPX with AXIS NetPilot, on page 26, the AXIS 560/660 is already installed for
printing in the NetWare environment.
IPX/SPX
If you need a more advanced installation that is not covered by the AXIS
NetPilot Installation Wizard, continue with Advanced Installation using AXIS
Advanced
NetPilot, on page 47.
configuration
Pure IP
See Basic Queue-based Printing (Pure IP), on page 51
If you intend to operate your AXIS 560/660 in a multiprotocol, mixed
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 5 Setting Up - Windows, on page 54
Section 6 Setting Up - OS/2, on page 80
Section 7 Setting Up - Macintosh, on page 86
Section 8 Setting Up - UNIX, on page 92
Section 4: Setting Up - NetWare
43