AXIS 5470e User's Manual
Verifying the
communication link
Notes:
•
In the Configuration Wizard, you must choose a new and unused name for
the printer (in the 'Printer Name' field) when in the 'TN5250E Protocol
Configuration' window.
•
In the Configuration Wizard's 'Printer Driver' window, PCL is used for
LaserWriter printers, all other values apply to matrix printers.
1. Type WRKCFGSTS *DEV xxxx*, where xxxx are the first
four characters of the printer device name, on the AS/400
command line and press Enter. A list of printer devices will be
displayed. Make sure that a virtual printer device is active.
2. Direct a printout to this printer device to check the integrity of
the communication link.
3. Press the test button on the AXIS 5470e once to print a test
page. Make sure that the TN5250E status is defined on the test
page as Idle, Actv or LU-1.
Section 4: Setting Up - AS/400
45