Axis 5470e User Manual page 217

AXIS 5470e User's Manual
IPDS PostScript
Configuration
Loaded Font
Smoothing
PostScript Error
Handler
Optimize Overlays
Virtual
Memory Kb
Click the IPDS PostScript Driver Settings tab and enter the
configuration settings for the parameters as described below. When
you are finished, click OK at the bottom of the page to save your
settings to the print sever.
A downloaded 240 dpi font may appear jagged when printed on a
300 dpi printer. The AXIS 5470e uses a font smoothing feature to
enhance the appearance of these fonts. The font smoothing may be
disabled if you want to speed up the font loading or if your printer
has insufficient PostScript virtual memory.
Loaded font smoothing is Enabled by default.
Note:
Font smoothing is optimized for printers with 300 dpi resolution. If your printer
has a resolution of 600 dpi or higher, the smoothing effect will be less significant.
In these cases we recommend that you disable the font smoothing to avoid
reduction in the performance.
Use this parameter to download a PostScript Error Handler to the
printer at power on. Once downloaded, the Error Handler will print an
error message if a PostScript error occurs.
The Error Handler is Disabled by default.
Enabling this parameter will activate an overlay optimization feature
resulting in faster throughput when using host downloaded overlays.
Enabling this feature will require more free Postscript Virtual Memory
in the printer.
This value defines how much memory the AXIS 5470e can use in the
PostScript printer for storing resources.
The default value is 2000 kbytes.
Section 20: IPDS Overview
217