System Menu [6] (Information) - Roland JUNO-Gi Owner's Manual

Mobile synthesizer with digital recorder
Hide thumbs Also See for JUNO-Gi:
Table of Contents

Advertisement

Parameter
Value
Filter
Type of filter
OFF
LPF
(Low Pass
Filter)
BPF
(Band Pass
Filter Type
Filter)
HPF
(High Pass
Filter)
PKG
(Peaking
Filter)
Cutoff
0–127
Resonance
0–127
LFO
LFO Rate
0–127
LFO Osc 1 Pitch
-63–+63
Depth
LFO Osc 2 Pitch
-63–+63
Depth
LFO Osc 1 Pulse
-63–+63
Width Depth
LFO Osc 2 Pulse
-63–+63
Width Depth
[3] (EXP)
Parameter
Value
Expression
Range Min
0–127
Range Max
0–127
84
Explanation
No filter is used.
This reduces the volume of all frequencies
above the cutoff frequency (Cutoff ).
This leaves only the frequencies in the region of
the cutoff frequency, and cuts the rest.
This cuts the frequencies in the region below
the cutoff frequency.
This emphasizes the frequencies in the region of
the cutoff frequency.
Frequency at which the filter begins to have an
effect on the waveform's frequency components
Emphasizes the portion of the sound in the
region of the cutoff frequency, adding character
to the sound.
Modulation speed of the LFO
Depth to which the LFO will modulate the Osc
1 pitch
Depth to which the LFO will modulate the Osc
2 pitch
Depth to which the LFO will modulate the pulse
width of the Osc 1 waveform
* The Pulse Width is activated when "SQR" is
selected with Osc 1 waveform.
Depth to which the LFO will modulate the pulse
width of the Osc 2 waveform
* The Pulse Width is activated when "SQR" is
selected with Osc 2 waveform.
Explanation
Lower limit of the range of the Active
Expression.
The effect will be applied when the position of
your hand above the D Beam controller is lower
than this value.
Upper limit of the range of the Active
Expression.
The effect will be applied when the position of
your hand above the D Beam controller is above
this value.
* By setting Range Max below Range Min you
can invert the range of change.
0
Range Min
Range Max
127
[4] (ASSIGN)
Parameter
Value
User Assignable
Function controlled by the D Beam controller
CC01–31, 33–95
BEND UP
BEND DOWN
USB SONG START
Type
RECORDER START
TAP TEMPO
AFTERTOUCH
Range Min
0–127
Range Max
0–127

System Menu [6] (INFORMATION)

Here you can view the JUNO-Gi's software version.
Explanation
Controller numbers 1–31, 33–95
Controls the pitch.
Controls the pitch.
The USB memory song player will start/stop.
The digital recorder will start/stop.
Tap tempo (a keyboard tempo specified by
the interval at which you move your hand
over the D Beam controller).
Produce the same effect as aftertouch.
Lower limit of the range of the D Beam
controller. The effect will be applied when
the position of your hand above the D Beam
controller is lower than this value.
Upper limit of the range of the D Beam
controller. The effect will be applied when
the position of your hand above the D Beam
controller is above this value.
* By setting Range Max below Range Min
you can invert the range of change.

Advertisement

Table of Contents
loading

Table of Contents