64: Reverb; Reverb; 65: Gated Reverb; Gated Reverb - Roland JUNO-Gi Owner's Manual

64: REVERB

Adds reverberation to the sound, simulating an acoustic space.
L in
Balance D

Reverb

R in
Balance D
Parameter Value
Type of reverb
ROOM1
ROOM2
STAGE1
Type
STAGE2
HALL1
HALL2
Pre Delay
0.0–100 msec
Time # 0–127
HF Damp 200–8000 Hz, BYPASS
Low Gain -15–+15 dB
High Gain
-15–+15 dB
Balance # D100:0W–D0:100W
Level 0–127

65: GATED REVERB

This is a special type of reverb in which the reverberant sound is cut off before its
natural length.
L in
Balance D
Reverb
R in
Balance D
Parameter Value
Type of reverb
NORMAL
REVERSE
Type
SWEEP1
SWEEP2
Pre Delay 0.0–100 msec
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Explanation
Dense reverb with short decay
Sparse reverb with short decay
Reverb with greater late
reverberation
Reverb with strong early
reflections
Reverb with clear reverberance
Reverb with rich reverberance
Adjusts the delay time from the
direct sound until the reverb
sound is heard.
Time length of reverberation
Adjusts the frequency above
which the reverberant sound
will be cut.
As the frequency is set lower,
more of the high frequencies
will be cut, resulting in a softer
and more muted reverberance. If
you do not want to cut the high
frequencies, set this parameter
to BYPASS.
Gain of the low range
Gain of the high range
Volume balance between the
direct sound (D) and the reverb
sound (W)
Output Level
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Explanation
Conventional gated reverb
Backwards reverb
The reverberant sound moves
from right to left
The reverberant sound moves
from left to right
Adjusts the delay time from the
direct sound until the reverb
sound is heard.
Parameter Value
Gate Time 5–500 msec
Low Gain -15–+15 dB
High Gain
-15–+15 dB
Balance # D100:0W–D0:100W
Level # 0–127

66: OVERDRIVE g CHORUS

L in
Balance D
Overdrive
Chorus
R in
Balance D
Parameter Value
Overdrive Drive # 0–127
Overdrive Pan # L64–63R
Chorus Pre Delay 0.0–100 msec
Chorus Rate # 0.05–10.00 Hz, note
Chorus Depth 0–127
Chorus Balance # D100:0W–D0:100W
Level 0–127
Explanation
Adjusts the time from when
the reverb is heard until it
disappears.
Gain of the low range
Gain of the high range
Volume balance between the
direct sound (D) and the reverb
sound (W)
Output Level
L out
Balance W
Balance W
R out
Explanation
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
sound
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the volume balance
between the sound that is sent
through the chorus (W) and the
sound that is not sent through
the chorus (D).
Output Level
71