Lfo1/8. Lfo2 - Roland JUNO-Gi Owner's Manual

7. LFO1/8. LFO2

Parameter Value Explanation
0–127 Modulation speed of the LFO
If you want the LFO rate to be synchronized
Note with the tempo, this should be set in terms of a
Rate
note value.
The setting of the tone assigned to the layer will
TONE
be used.
Specifies whether the LFO cycle will be
OFF, ON synchronized to begin when the key is pressed
(ON) or not (OFF).
Key Trigger
The setting of the tone assigned to the layer will
TONE
be used.
How deeply the LFO will affect pitch
OFF,
Pitch Depth
If you choose the OFF setting, the tone's value
-63–+63
will be set to 0.
How deeply the LFO will affect the cutoff
frequency
OFF,
TVF Depth
-63–+63
If you choose the OFF setting, the tone's value
will be set to 0.
How deeply the LFO will affect the volume
OFF,
TVA Depth
If you choose the OFF setting, the tone's value
-63–+63
will be set to 0.
How deeply the LFO will affect the pan
OFF,
Pan Depth
If you choose the OFF setting, the tone's value
-63–+63
will be set to 0.
43