Wah; Compressor; Limiter; Octave - Roland JUNO-Gi Owner's Manual

WAH

Parameter Value
Selects the wah mode.
MANUAL
Mode
T.UP
T.DOWN
Selects the type of wah.
CRY WAH
VO WAH
FAT WAH
Type (*1)
LIGHT WAH
7STRING WAH
RESO WAH
Pedal Position
0–100
(*1)
Sens (*2)
0–100
Frequency (*2) 0–100
Peak (*2) 0–100
(*1) Setting available with MODE set to MANUAL.
(*2) Setting available with MODE set to T.UP or T.DOWN.
Explanation
If you set "Control Pedal Assign" (p. 81) to
"INSERT FX CTRL, " you can use an expression
pedal connected to the PEDAL CONTROL
jack to control wah.
This produces a wah effect matched to the
intensity of picking.
This models the sound of the CRY BABY wah
pedal popular in the '70s.
This models the sound of the VOX V846.
This is a wah sound featuring a bold tone.
This wah has a refined sound with no
unusual characteristics.
This expanded wah features a variable range
compatible with seven-string and baritone
guitars.
This completely original effect offers
enhancements on the characteristic
resonances produced by analog synth filters.
Adjusts the position of the wah pedal.
This parameter will change when you
operate the expression pedal.
This sets the sensitivity of response to the
input sound.
Adjusts the center frequency of the Wah
effect.
This sets the intensity of the wah sound.

COMPRESSOR

Parameter Value
Sustain 0–100
Attack 0–100
Level 0–100

LIMITER

Parameter Value
Threshold
0–100
Release 0–100
Level 0–100

OCTAVE

Parameter Value Explanation
Octave Level 0–100 This sets the volume level of the effect sound.
Direct Level 0–100 This sets the volume level of the direct sound.

AC.PRO

Parameter Value Explanation
Selects the modeling type.
This is the sound of a small-bodied acoustic
SMALL
guitar.
Type This is a standard, unadorned acoustic guitar
MEDIUM
sound.
BRIGHT This is a bright acoustic guitar sound.
POWER This is a powerful acoustic guitar sound.
Bass -50–+50 Adjusts the low-end volume.
Middle -50–+50 Adjusts the midrange volume.
Treble
-50–+50 Adjusts the high-end volume.
Explanation
This sets the sustain for the sound.
This sets the attack (onset) of the sound.
This sets the volume level of the effect.
Explanation
When the input signal level exceeds the level
set here, limiting will be applied.
Adjusts the amount of time that the limiting
effect is applied after the signal exceeds the
threshold level.
This sets the volume level of the effect.
113