Pro Edit Screen; General; Pitch Env - Roland JUNO-Gi Owner's Manual

PRO EDIT Screen

Basic operations in the Pro Edit screen
Basic operations in the Pro Edit screen are the same as described in "Basic Operations in
the LIVE SET EDIT Screen" (p. 34), but the function buttons operate as follows.
Button Explanation
Lists the edit groups. Use the VALUE dial or the
[1] (GRP LIST)
cursor [
press the [ENTER] button to confirm.
[2] (GRP h) Moves to the preceding edit group.
[3] (GRP i) Moves to the next edit group.
[6] (EXIT) Moves to the LIVE SET EDIT 3 screen.
MEMO
By holding down the [SHIFT] button and pressing the cursor [ ] button, you can
select the same parameter for multiple layers and set them simultaneously.

1. GENERAL

Parameter Value Explanation
Width of random pitch deviation that will occur
each time a key is pressed (in 1-cent steps)
0–1200
If you do not want the pitch to change randomly,
Rand Pitch Depth
set this to "0. "
The setting of the tone assigned to the layer will
TONE
be used.
When one key is held down and another key is
then pressed, only the pitch changes, without
the attack of the latter key being played. Set
OFF
this to "OFF" when performing wind and string
phrases or when using modulation with the
mono synth keyboard sound.
Legato Retrigger
Normally you will leave this parameter "ON. "
* Legato Retrigger is valid when the
ON
The setting of the tone assigned to the layer will
TONE
be used.
NORM Portamento will always be applied.
Portamento will be applied only when you play
Portamento
LEGT
legato.
Mode
The setting of the tone assigned to the layer will
TONE
be used.
Speed of pitch change is uniform (the time
RATE required for the pitch change will correspond to
the distance of the pitch change)
Portamento Type
The time it takes will be constant, regardless of
TIME
how far apart in pitch the notes are.
The setting of the tone assigned to the layer will
TONE
be used.
Starts a new portamento when another key is
PICH
pressed while the pitch is changing.
Portamento will begin anew from the pitch
Portamento Start
NOTE
where the current change would end.
The setting of the tone assigned to the layer will
TONE
be used.
] [ ] buttons to select a group, and
Mono/Poly is set to "MONO" and the
Legato Switch is set to "ON."
Parameter Value Explanation
The tone begins to play after the time specified
NORM
in the Tone Delay Time parameter has elapsed.
Although the tone begins to play after the time
specified in the Tone Delay Time parameter has
HOLD elapsed, if the key is released before the time
specified in the Tone Delay Time parameter has
elapsed, the tone is not played.
Rather than being played while the key is
pressed, the tone begins to play once the
period of time specified in the Tone Delay
Time parameter has elapsed after release of
the key. This is effective in situations such as
when simulating noises from guitars and other
OFFN
instruments.
* If you have selected a waveform that is
Delay Mode
Rather than being played while the key is
pressed, the tone begins to play once the
period of time specified in the Tone Delay Time
parameter has elapsed after release of the key.
Here, however, changes in the TVA Envelope
begin while the key is pressed, which in many
cases means that only the sound from the
OFFD
release portion of the envelope is heard.
* If you have selected a waveform that is
The setting of the tone assigned to the layer will
TONE
be used.
Time from when the key is pressed (or if the Tone
Delay Mode parameter is set to "OFFN" or "OFFD, "
0–127
the time from when the key is released) until
when the tone will sound
Delay Time Specify this as a note value if you want to
Note synchronize the delay to the tempo of the
JUNO-Gi.
The setting of the tone assigned to the layer will
TONE
be used.
Portamento Start: PITCH
Pitch
C5
D4
C4
press D4 key
press C5 key
press C4 key

2. PITCH ENV

Parameter Value Explanation
Keyboard playing dynamics can be used to
control the depth of the pitch envelope.
P-Env V-Sens -64–+63
If you want the pitch envelope to have more ef-
fect for strongly played notes, set this parameter
to a positive (+) value.
This allows keyboard dynamics to affect the T1 of
the Pitch envelope.
P-Env T1 V-Sens
-64–+63
If you want T1 to be speeded up for strongly
played notes, set this parameter to a positive
(+) value.
a decay-type sound (i.e., a sound that
fades away naturally even if the key
is not released), selecting "OFFN" may
result in no sound being heard.
a decay-type sound (i.e., a sound that
fades away naturally even if the key is
not released), selecting "OFFD" may
result in no sound being heard.
Portamento Start: NOTE
Pitch
C5
D4
C4
Time
press D4 key
press C5 key
press C4 key
Time
39