24: Flanger; Flanger; 25: Step Flanger; Step Flanger - Roland JUNO-Gi Owner's Manual

24: FLANGER

This is a stereo flanger. (The LFO has the same phase for left and right.)
It produces a metallic resonance that rises and falls like a jet airplane taking off or
landing. A filter is provided so that you can adjust the timbre of the flanged sound.
Balance D
L in

Flanger

Feedback
Feedback
Flanger
R in
Balance D
Parameter Value
Type of filter
OFF
Filter Type
LPF
HPF
Cutoff Freq 200–8000 Hz
Pre Delay 0.0–100 msec
Rate # 0.05–10.00 Hz, note
Depth
0–127
Phase 0–180 deg
Feedback # -98–+98%
Low Gain
-15–+15 dB
High Gain -15–+15 dB
Balance # D100:0W–D0:100W
Level 0–127
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Explanation
No filter is used
Cuts the frequency range above
the Cutoff Freq
Cuts the frequency range below
the Cutoff Freq
Center frequency when using the
filter to cut a specific frequency
range
Adjusts the delay time from
when the direct sound begins
until the flanger sound is heard.
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative (-)
settings will invert the phase.
Gain of the low range
Gain of the high range
Volume balance between the
direct sound (D) and the flanger
sound (W)
Output Level

25: STEP FLANGER

This is a flanger in which the flanger pitch changes in steps. The speed at which the
pitch changes can also be specified in terms of a note-value of a specified tempo.
Balance D
L in

Step Flanger

Feedback
Feedback
Step Flanger
R in
Balance D
Parameter Value
Type of filter
OFF
Filter Type
LPF
HPF
Cutoff Freq 200–8000 Hz
Pre Delay 0.0–100 msec
Rate # 0.05–10.00 Hz, note
Depth 0–127
Phase
0–180 deg
Feedback # -98–+98%
Step Rate # 0.10–20.00 Hz, note
Low Gain -15–+15 dB
High Gain
-15–+15 dB
Balance # D100:0W–D0:100W
Level 0–127
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Explanation
No filter is used
Cuts the frequency range above
the Cutoff Freq
Cuts the frequency range below
the Cutoff Freq
Center frequency when using the
filter to cut a specific frequency
range
Adjusts the delay time from
when the direct sound begins
until the flanger sound is heard.
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative (-)
settings will invert the phase.
Rate (period) of pitch change
Gain of the low range
Gain of the high range
Volume balance between the
direct sound (D) and the flanger
sound (W)
Output Level
57