47: 3Tap Pan Delay; 48: 4Tap Pan Delay; 49: Multi Tap Delay; Multi Tap Delay - Roland JUNO-Gi Owner's Manual

47: 3TAP PAN DELAY

Produces three delay sounds; center, left and right.
L in
Left Tap
Triple Tap Delay Center Tap
Feedback
Right Tap
R in
Parameter Value
Delay Left/Right/
0–2600 msec, note
Center
Center Feedback # -98–+98%
HF Damp 200–8000 Hz, BYPASS
Left/Right/Center
0–127
Level
Low Gain -15–+15 dB
High Gain
-15–+15 dB
Balance # D100:0W–D0:100W
Level 0–127

48: 4TAP PAN DELAY

This effect has four delays.
L in
Delay 1
Feedback
Delay 2
Quadruple Tap Delay
Delay 3
Delay 4
R in
Stereo location of each delay
2 3
1 4
R
L
Parameter Value
Delay 1-4 Time 0–2600 msec, note
Delay 1 Feedback # -98–+98%
Balance D
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Balance D
Explanation
Adjusts the time from the
original sound until the left,
right, and center delayed sounds
are heard
Adjusts the amount of the delay
sound that's fed back into the
effect. Negative (-) settings invert
the phase.
Adjusts the frequency above
which sound fed back to the
effect is filtered out. If you do
not want to filter out any high
frequencies, set this parameter
to BYPASS.
Volume of each delay
Gain of the low range
Gain of the high range
Volume balance between the
direct sound (D) and the delay
sound (W)
Output Level
Balance D
L out
Balance W
Balance W
R out
Balance D
Explanation
Adjusts the time from the
original sound until delay sounds
1–4 are heard
Adjusts the amount of the delay
sound that's fed back into the
effect. Negative (-) settings invert
the phase.
Parameter Value
HF Damp 200–8000 Hz, BYPASS
Delay 1-4 Level
0–127
Low Gain -15–+15 dB
High Gain -15–+15 dB
Balance #
D100:0W–D0:100W
Level 0–127

49: MULTI TAP DELAY

This effect provides four delays. Each of the Delay Time parameters can be set to a note
length based on the selected tempo. You can also set the panning and level of each
delay sound.
L in
Feed Delay 1
back
Delay 3

Multi Tap Delay

Delay 4
Delay 2
R in
Parameter Value
Delay 1-4 Time 0–2600 msec, note
Delay 1 Feedback # -98–+98%
HF Damp 200–8000 Hz, BYPASS
Delay 1-4 Pan
L64–63R
Delay 1-4 Level 0–127
Low Gain -15–+15 dB
High Gain -15–+15 dB
Balance # D100:0W–D0:100W
Level 0–127
Explanation
Adjusts the frequency above
which sound fed back to the
effect is filtered out. If you do
not want to filter out any high
frequencies, set this parameter
to BYPASS.
Volume of each delay
Gain of the low range
Gain of the high range
Volume balance between the
direct sound (D) and the delay
sound (W)
Output Level
Balance D
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Balance D
Explanation
Adjusts the time until Delays 1–4
are heard.
Adjusts the amount of the delay
sound that's fed back into the
effect. Negative (-) settings invert
the phase.
Adjusts the frequency above
which sound fed back to the
effect is filtered out. If you don't
want to filter out any the high
frequencies, set this parameter
to BYPASS.
Stereo location of Delays 1–4
Output level of Delays 1–4
Gain of the low range
Gain of the high range
Volume balance between the
direct sound (D) and the effect
sound (W)
Output Level
65