Entering A Value ([Numeric] Button); The [Menu] Button Function; Assigning A Name - Roland JUNO-Gi Owner's Manual

Entering a Value ([NUMERIC] Button)

If you turn the [NUMERIC] button on, you'll be able to use the [0]–[9]
buttons to enter numeric values.
You can use this method to numerically specify live set numbers or
tone numbers.
1. Use the cursor buttons to move the cursor to the number
that you want to change.
2. Press the [NUMERIC] button so it's lit.
The [0]–[9] buttons will light.
3. Use the [0]–[9] buttons to enter a numerical value, and then
press the [ENTER] button.
Your input will be finalized, and the illumination of the [0]–[9] buttons
will return to their previous state.
If you press the [NUMERIC] button once again without pressing the
[ENTER] button, the [0]–[9] buttons will return to their previous state
without the number being changed.
MEMO
When you've turned the [NUMERIC] button on and are entering a
number, pressing the [EXIT] button will cancel the value.

The [MENU] Button Function

When you press the [MENU] button, a menu will appear in the display.
1. Press the [MENU] button.
2. Use the VALUE dial or cursor buttons to select menu and
then press the [ENTER] button.
Menu Explanation
1. Live Set Edit Edit a Live Set
2. Effect Edit
Edit effects
3. Layer/Split Settings for each layer
4. System Overall settings for the entire JUNO-Gi
5. Utility Back up data, format a card, etc.
If you press the [MENU] button while in the RECORDER screen, a
recorder-related menu will appear.
Menu Explanation
1. Song Edit Song function menu
2. Track Edit Track editing function menu
3. Utility
Back up data, format a card, etc.

Assigning a Name

On the JUNO-Gi, you can assign names to each live set, song. The
procedure is the same for any type of data.
1. Press the [ ] [ ] buttons to move the cursor to the location
where you wish to input a character.
2. Turn the VALUE dial, or press the [DEC] [INC] buttons to
specify the character.
Button
[2] (TYPE)
[3] (DELETE)
[4] (INSERT)
[5] (CANCEL)
[6] (NEXT)
or
[6] (EXEC)
[ ] [ ]
[ ] [ ]
MEMO
In a screen that allows you to assign a name, you can press the
[MENU] button and perform the following operations.
Menu
1. Undo
2. To Upper
3. To Lower
4. Delete All
NOTE
Page
You can't enter lowercase characters for a file name (track export).
p. 34
p. 44
p. 25
p. 80
p. 78
Page
p. 98
p. 98
p. 78
Explanation
Selects the type of character. Each time you press
this, you will alternately select the first character
of a character set: uppercase (A), lowercase (a), or
numerals and symbols (0).
Deletes the character at the cursor location.
Inserts a space at the cursor location.
Cancels the input and exits the naming screen.
Saves the changes you've made.
Move the cursor.
Switch between uppercase and lowercase letters.
Explanation
Return an edited name to its original state.
Change the character at the cursor location to
uppercase.
Change the character at the cursor location to
lowercase.
Clear all of the currently entered characters.
19