Editing A Tone (Tone Edit); Ä Editing A Tone; (Tone Edit Screen) - Roland JUNO-X Reference Manual

Editing a Tone
With the JUNO-X, you can add a variety of effects to process the tones, and you can use the controllers such as the buttons and knobs to edit the
tones themselves.
*Elements of a tone (expanded view)
¹ Model: JUNO-X, JUNO-106, JUNO-60
OSC
PW SUPER SAW (*)
SAW
SUB
Ò1oct
ENVELOPE (*)
NOISE
Elements marked with an asterisk (*) are enabled only for the JUNO-X model.
* Some functions may vary, depending on the model.
Pitch information for the key you play is sent to the oscillator, and is output as sound via the mixer, filter, and amp etc.
The change produced by each section can be modified using an LFO or envelope.
Editing a Tone

(TONE EDIT Screen)

From the MODEL BANK TOP screen, you can use the [Í] [Ë] buttons to move to the pages at the right, and edit the tone from the tone edit pages.
MODEL BANK
MODEL BANK TOP
* You can also access the tone edit pages from the MENU screen.
Ø "Accessing the MENU Screen" (p. 42)
1 .
Press the [MODEL BANK] button .
The MODEL BANK screen appears.
* Only some models allow multiple selection.
2 .
Use the [Í] [Ë] buttons to move to the tone edit page of the item that you want to edit .
3 .
Use the [ÇSELECTÉ] knob to select the parameter that you want to edit, and use the [- VALUE +] knob to change
the value .
For details, refer to "Parameter Guide" (PDF).
4 .
If you want to save the setting, execute the Tone Write operation .
4-1 .
Hold down the [SHIFT] button and press the [MENU] (WRITE) button.
The WRITE MENU screen appears.
4-2 .
Use the [ÇSELECTÉ] knob to select the part where the tone you want to save is assigned, and then press the [ENTER] (INIT) button.
4-3 .
Use the [ÇSELECTÉ] knob and the [- VALUE +] knob to select the save-destination, and then press the [ENTER] (INIT) button.
If you want to rename the tone that's being saved, use the [Í] [Ë] buttons to move the cursor and use the [- VALUE +] knob to specify characters.
4-4 .
Press the [ENTER] (INIT) button.
4-5 .
To execute, press the [ENTER] (INIT) button.
(TONE EDIT)
LFO
MFX/
HPF FILTER AMP
JUNO
CHORUS
ENVELOPE
>
<
>
<
screen
[EXIT] button
¹ Model: XV-5080, RD-PIANO, etc.
Partial 4
Partial 3
LFO 1/2
Partial 2
LFO 1/2
Partial 1
LFO 1/2
OSC FILTER
LFO 1/2
OSC FILTER
OSC FILTER
ENVELOPE ENVELOPE
OSC FILTER
ENVELOPE ENVELOPE
ENVELOPE ENVELOPE
ENVELOPE ENVELOPE
TONE
TONE
COMMON TONE MFX
EDIT
EDIT
> > >
TONE
TONE TONE
COMMON
PARTIAL 1 PARTIAL 2
< < <
EDIT
[ENTER] (INIT) button
TONE LIST
AMP
AMP
MFX
AMP
ENVELOPE
AMP
ENVELOPE
ENVELOPE
ENVELOPE
SCENE
Â
> >
TONE TONE
TONE MFX
PARTIAL 3 PARTIAL 4
< <
* Press the [EXIT] button to return to the MODEL BANK TOP screen.
MODEL
PART
BANK
 Ã
25