The Functions of Parameters Set
Individually for Each Part (Edit screen)
Parameters for individual parts are set in the Edit screen. The Edit screen contains
nine groups of parameters: EFFECT, EDIT, MODIFY, S.TUNE, MOD, BEND, CAF,
CC1, and U.INST. Use the following procedure to make settings.
Procedure
1
To set parameters for an individual part, make sure that the
is selected, and then press
screen
2
Press [EDIT].
The edit screen will appear.
fig.5-2
3
Press [F1] – [F4] to select from the following parameter groups.
[F1]
EFFECT
S.TUNE
CAF
For details about each parameter, refer to What Each Parameter Does (p.54).
4
Press
[
] or
VAR.
the parameter you want to modify
5
Rotate the [VALUE] knob, or press [DEC] or [INC] to set the value for the
parameter.
6
When you finish making settings, press [EXIT] to end the procedure.
[
PART
[F2]
[F3]
EDIT
MODIFY
MOD
BEND
CC1
U.INST
[
] to move the cursor up and down, and select
INST
Part Basic
] or [
] to select the part.
[F4]
About Parts and Parameters
For details on the U.INST
parameters, refer to
Creating and Saving a
Sound (User Instrument)
(p.67).
The Edit screen refers to
the state when [EDIT] is
pressed in the Part Basic
screen.
Part Basic screen (p.29)
After pressing the [EDIT]
button in step 2, you can
also switch part status by
simultaneously pressing
both the PART [
] and
[
] buttons (ALL).
Pressing [ ] ([F4]) scrolls
the screen to the next.
After you have finished
setting the value in step 5,
you can simultaneously
press [DEC] and [INC] to
transmit the currently
displayed parameter value.
(p.135)
51