Programming - Panasonic KX-TDA30 Features Manual

2.3 System Data Control
2.3.2 PT Programming
Description
A PT user can perform the following programming:
a)
Personal Programming: Customising the extension according to his needs.
b)
System Programming: Customising the PBX according to organisational needs.
c)
Manager Programming: Customising specified frequently changing items (e.g., Charge
Management and Remote Extension Lock).
Conditions
• COS programming determines what programming can be performed (→ Programming Mode Limitation
[516]):
– System programming and personal programming
– Personal programming only
– No programming
• The extension which is connected to the lowest numbered extension port can perform both personal
programming and system programming regardless of the COS.
• The extension(s) assigned as the manager COS can perform manager programming.
• During programming, the PT is considered to be busy.
• Access to system programming and manager programming is allowed only one at a time. However, one
PBX supports up to 16 simultaneous programmers (one system programmer + 15 personal
programmers, one manager programmer + 15 personal programmers, or 16 personal programmers).
• System Programming Password Level
To access system programming, a valid password must be entered. For more details, see Section 3.1
Introduction.
• Personal Programming Data Default Set
A user can return all of the items programmed on the telephone to default.
Feature Guide References
2.2.6 Manager Features
3.3 PT Programming
User Manual References
3.1 Customising Your Phone (Personal Programming)
3.2 Manager Programming
3.3 Customising Your System (System Programming)
318 Feature Guide