L2 Features > Vlan > Port-Based Vlan - D-Link DGS-1100-05 User Manual

4 Configuration
The IEEE 802.1Q VLAN Configuration page provides powerful VID management functions. The original
settings have the VID as 1, no default name, and all ports as "Untagged"
Click Rename to rename the VLAN group.
Click Delete to remove the VLAN group.
To create a new VID group, click Add VID and the following will be displayed:
The fields that can be configured for 802.1Q VLAN are described below:
Item
VID
VLAN Name
Port
Click Apply to create a new VID group.
To configure the PVID settings, click PVID Settings and the following will be displayed:
Click Apply to make the configurations take effect.
Click Cancel to discard any changed made and return to the previous page.
L2 Features > VLAN > Port-Based VLAN
Port-Based VLANs are the simplest and most common form of VLAN. It assigns physical LAN ports to
VLANs, effectively broadening their application. You can assign multiple ports to the same VLAN, or each
port to a separate VLAN. The default is disabled.
Figure 4.28 – L2 Features > VLAN > 802.1Q VLAN
Figure 4.29 – L2 Features > VLAN > 802.1Q VLAN – Add VID
Description
Enter the VID to be created.
Enter the VLAN name for the VID to be created.
Assign ports as Untag, Tag or Not Member. Click All to select all
ports.
Table 4.15
Figure 4.30 – L2 Features > VLAN > 802.1Q VLAN – PVID Settings
D-Link Smart Managed Switch User Manual
2 2 5 5