Powering Down - Christie M Series User Manual

2.2.8 Powering Down

The projector can be powered down by using one
of the following methods:
Remote Keypad/Built-In Keypad
• Press and hold P
OR
• Press P
OWER
OR
• Press P
OWER
DOWN key.
NOTE:
second key is not pressed immediately, a
confirmation window will appear. The second key
press must be pressed within 1 second of the window appearing.
After powering down, the Status LEDs cycle and the LCD displays the message "Cooling Down", until
NOTE:
cool down is complete.
Web User Interface (UI)
1. From the Main Tab, Select Power>OFF.
down, see Figure
2. Select Yes.
M Series User Manual
020-100009-05 Rev. 1 (09-2010)
F 2-20 P
IGURE
OWER
twice
once, then immediately press the
For Step 2 and 3, if the
2-21.
S F
OSITION ETSCREW LUSH
F 2-21 P
IGURE OWERING
A window will display for confirmation on powering
NOTE:
Section 2: Installation and Setup
D /W U I
OWN EB SER NTERFACE
2-19