Detailed Setup And Installation; About The Projector - Christie M Series User Manual

STEP 7- Adjusting Image
Adjust the image settings, such as Brightness, Contrast, Gamma, Focus, Zoom etc. using the direct keys on the
remote or built in keypad.
2.2

Detailed Setup and Installation

2.2.1 About the Projector

Built-in Keypad
The built-in keypad is located on the side of the projector. Use it similarly to the IR remote to control the
projector. An LCD display is located above the keypad for displaying projector status.
AC Receptacle
The AC receptacle is located at the back of the projector. Use this receptacle to plug in an appropriately rated
line cord.
NOTE:
details.
M Series User Manual
020-100009-05 Rev. 1 (09-2010)
Refer to
NOTE:
Always power down the projector and disconnect all power sources before servicing
or cleaning.
Refer to Safety Warnings and Guidelines in
F 2-7 A
IGURE BOUT THE
The power switch is located above the AC receptacle. Refer to
Section 3 Operation for more details.
Section 5 Maintenance
P - R
ROJECTOR EAR
Section 2: Installation and Setup
.
/S V
IDE IEW
Section 7 Specifications for
2-5