Christie M Series User Manual page 65

WHAT IS THE RESIZING DEFAULT? By default when displaying a new source, your image will utilize as
much of the projector's display area as possible for the type of incoming source data, but with minimal or no
changes to aspect ratio. See Select "Default" below.
The "Custom" re-size descriptor automatically appears in the Size and Position menu when any of the values
for Size, Vertical Stretch, H-Position, V-Position or Blanking do not correspond to those for a preset. This
option is not offered in the Resize Presets pull-down list.
• Select DEFAULT for most sources (factory default). The image will be centered and displayed as large as
possible depending on the type of source.
• NO RESIZING displays the image in its native resolution, which may or may not match the projector's
resolution. For example, for a source with a native resolution of 800 x 600, "No Resizing" in an SXGA+
projector will use the central 800 x 600 pixels and have a black border—the black border areas are unused
areas, see below.
• FULL SIZE uses all pixels for displaying the image,
regardless of source or original aspect ratio. Incoming
source material having a different aspect ratio than
the projector will be stretched for display.
M Series User Manual
020-100009-05 Rev. 1 (09-2010)
F 3-19 R D
IGURE ESIZING
F 3-20 N R
IGURE O ESIZING
EFAULT
F 3-21 F
IGURE
Section 3: Operation
S
ULL IZE
3-19