Typographical Notations; Purchase Record And Service Contacts - Christie M Series User Manual

Section 1: Introduction

1.1.1 Typographical Notations

The following notations are used throughout this manual:
• Keypad commands and PC keystrokes appear in bold, small caps, such as
• References to specific areas within the current document appear italicized and underlined. When viewed
online, the text appears in blue indicating a direct link to that section. For example,
Setup.
• References to other documents appear italicized and blue. When viewed online, the text appears in blue
indicating a direct link to that section. For example, refer to
• References to software menus and available options appear bold, such as Main menu, and available options
appear italicized, such as Preferences.
• User input or messages that appear on screen, in status display units or other control modules appear in
Courier font. For example. "No Signal Present", Login: christiedigital.
• Error codes, LED status codes appear bold, e.g.
• Operational states of modules appear capitalized, such as power ON/OFF.
1.2

Purchase Record and Service Contacts

Whether the projector is under warranty or the warranty has expired, Christie's highly trained and extensive
factory and dealer service network is always available to quickly diagnose and correct projector malfunctions.
Complete service manuals and updates are available for all projectors. Should a problem be encountered with
any part of the projector, contact your dealer. In most cases, servicing is performed on site. If you have
purchased the projector, fill out the information below and keep with your records.
Table 1.1
Dealer:
Dealer or Christie Sales/Service Contact Phone Number:
Projector Serial Number*:
Purchase Date:
Installation Date:
* The serial number can be found on the license label located on the back of the projector.
Table 1.2 Ethernet Settings
Default Gateway:
DNS Server:
Projector DLP Address:
Projector Mgmt IP Address:
Subnet Mask:
1-2
Service Manual.
LP, A1, etc.
, ,
etc.
POWER INPUT ENTER
Section 2 Installation and
M Series User Manual
020-100009-05 Rev. 1 (09-2010)