Christie M Series User Manual page 81

• MENU LOCATION
Use the pull-down list to choose a pre-defined default or customized location for the display of all on-screen
menus.
To create a custom menu location:
1. Choose a preset that is closest to the desired location.
2. Adjust Horizontal Shift and Vertical Shift slide bars to move the menu to the desired location.
Avoid locations too close to a corner or edge to prevent cropping of larger menus.
• HORIZONTAL SHIFT AND VERTICAL SHIFT
Shift your menus as desired, creating a customized menu location.
• DISPLAY AUTOMATIC MESSAGE BOXES
Enable or disable the pop-up of automatic message boxes. These are messages to the user that are not directly
triggered by user actions. Examples are signal information, function limitation or auto calibration message
boxes.
• DISPLAY USER MESSAGE BOXES
Enable or disable the pop-up of message boxes that are directly triggered by user actions. Examples are gamma
or lens control message boxes.
• DISPLAY ERROR MESSAGES
Choose how you want to be notified of errors detected in either the incoming signal or projector. Select Screen
or All (default) to see brief on-screen messages. This is recommended during setup or testing of the projector.
Or select "Serial Ports" to receive messages via RS-232 or RS-422 serial communication only. To hide error
message displays, such as during shows and presentations, select Off or Serial Ports.
• SPLASH SCREEN SETUP
Choose when to display a special introductory splash screen image, such as your company logo, graphic or
message.
• Always Off – A splash screen never appears
• Start-up Only – The splash screen logo appears at projector start-up only.
• Start-up And No Signal – A splash screen appears at start-up and at any time when there is no signal.
To add your own splash screen in addition to the default "Christie logo" splash screen, use the Web UI to
download the desired bitmap (.bmp) file to the projector. This will overwrite any other user splash screen that
has been downloaded.
• OSD TRANSPARENCY
Check this box if you want the OSD menu backgrounds to be transparent.
• MENU TYPE
Select the Basic or Advanced menu type from this list box. The Advanced menu setting will give the menu
options. The Basic menu setting will give a small number of the most frequently used menu items.
• SPLASH SCREEN
Choose which splash screen is to be used; the default or user downloaded splash screen.
• CASCADING MENUS
Enable or disable cascading menus. When disabled, a single menu level will be displayed on the OSD at a
time.
M Series User Manual
020-100009-05 Rev. 1 (09-2010)
Only one user splash screen can be saved in the projector.
NOTE:
Section 3: Operation
NOTE:
3-35