Christie M Series User Manual page 74

Section 3: Operation
• COLOR ENABLE
Select which color or colors you want to see in the display, useful while working with color temperature white
levels or input levels.
used. If color temperature is set up based on the internal test patterns, you can set up input levels for a given
2)
source so that it matches the color temperature of the internal test patterns.
ADVANCED IMAGE SETTINGS - S
Use the Advanced Image Settings submenu to make the adjustments necessary for lesser-used but more
specialized applications on your projector.
• GAMMA SETTINGS
The system offers two types of gamma correction. Gamma correction can be applied to a specific source to
correct for luma encoding. This is a channel setting and reapplied every time the same signal is detected. This
is the 'Gamma' control. On the other hand the system also provides a global Gamma Correction control. The
global control offers an offset applied to all channels. This offset is used to compensate for changes in ambient
conditions such as ambient light in the room and projected material.
• GAMMA CORRECTION - Applies a global offset to all gamma settings for each channel. It affects the
shape of the curve by performing a linear transform toward a gamma curve of 1.0 while the control is
increasing and likewise a linear transform toward a gamma of 3.0 as the control is decreasing. The control
should only be adjusted to compensate for ambient conditions. To correct a particular source only, use the
Gamma control.
• GAMMA - Select the base gamma table for a given source.
Select from one of the standard tables, a custom gamma
function, or select an arbitrary gamma table that has been
downloaded to the projector.
needed to do this.
3-28
F 3-29 A
IGURE DJUSTING
(RED EXAMPLE SHOWN)
Input levels apply for the current source only, but for any color temperature
NOTES: 1)
UBMENU
A separate PC utility is
NOTE:
I L U
NPUT EVELS SING THE
P D
EAK ETECTOR
F 3-30 G
IGURE AMMA
M Series User Manual
020-100009-05 Rev. 1 (09-2010)
C
URVE