Remote Access Page; Remote Acces Page; Remote Discovery; State - Proliphix NT10e Configuration Manual

Rev 2.0

Remote Access Page

The Remote Access Page
intercommunication of the thermostat with the Proliphix Web Site for Remote Management.
A Submit must be issued by the user to apply all changes made in the Control column. The status of
most functions will be updated upon clicking the Refresh button.

Remote Discovery

The Proliphix Network Thermostats can be accessed remotely anywhere in the world with only the use of a web
browser. Proliphix thermostats automatically intercommunicate with the Proliphix Web Site to provide this
capability. Certain parameters must be configured in this section to facilitate the Remote Management feature.

State

This parameter controls whether or not the Remote Management feature is enabled. (See
Proliphix Remote Management Setup Guide)
Status and Control:
Disabled (default) – Remote Management function is disabled.
Enabled – The thermostat is enabled to participate with the Proliphix Web Site to provide
Remote Management capability.

Site Name

If more than one thermostat intercommunicates with the Proliphix Web Server, they are
identified at the Web Server by this unique parameter. (See Proliphix Remote Management
Setup Guide)
Status and Control:
contains all the pertinent parameters necessary to invoke and control the
Figure 27 – Remote Access Page
Page 49 of 54