Status & Control Screen - Proliphix NT10e Configuration Manual

Rev 2.0
Status & Control Screen
The third Primary Screen is the Status & Control Screen. (This is the second Primary Screen on the NT10e
or NT20e if remote sensors are disabled.) Each status field is highlighted as the user navigates up or down
by pressing the Up or Down arrows. Selecting the desired status field is made by pressing the Select
button.
Field Definitions – Status & Control
Thermostat Control
- When highlighted and selected, takes the user to the Thermostat Control Secondary Screen
below.
Thermostat Status
- When highlighted and selected, takes the user to the Thermostat Status Secondary Screen
below.
Alarm Status
- When highlighted and selected, takes the user to the Alarm Status Secondary Screen below.
Network Status
- When highlighted and selected, takes the user to the Network Status Secondary Screen
below.
Screen 3.0
Status & Control
Thermostat Control
Thermostat Status
Alarm Status
Network Status
Prev Select
Figure 9 – Status & Control Screen
Next
Page 16 of 54