Filter Last Replaced; Reminder Pending - Proliphix NT10e Configuration Manual

Rev 2.0
and will be displayed on the Status & Control Page. In addition, this alarm will be sent to
the Proliphix website to trigger an e-mail notification if this feature is enabled. (See Remote
Access Page). Specific action must be taken to clear this alarm condition. This is a minor
(yellow) alarm condition. See Figure 16b
Status and Control:
Never (default) – Interval reminder disabled.
3 Months – Sets the filter change reminder interval to 3 months after submitting.
6 Months – Sets the filter change reminder interval to 6 months after submitting.
9 Months – Sets the filter change reminder interval to 9 months after submitting.
12 Months – Sets the filter change reminder interval to 12 months after submitting.
The following additional fields will be displayed upon different settings and conditions of the
Filter Reminder state.

Filter Last Replaced

This field will be visible if any Filter Reminder interval is chosen, other than "Never".
Status:
Date and Time – This is the stored thermostat date and time used as the time reference for
the Filter Reminder interval (above). This date is set after issuing a "Submit" with the Filter
Replaced checkbox checked. (e.g. If a 3 Month interval is chosen for the Filter Reminder,
an alert will be generated three months from this date.)
Control:
Filter Replaced Checkbox – Checking this box and then pressing "Submit", will force the
current thermostat date and time into the Date and Time field above and restart the interval
set within the Filter Reminder field above. (e.g. If the filter is changed prior to the Filter
Reminder interval expiration, checking this box and pressing a "Submit" will restart the
interval.)

Reminder Pending

This field will be visible if the Filter Reminder interval has expired. If this field is present, an
alert has been generated.
Status:
Yes – An alarm has been generated because the Filter Reminder interval has expired.
Page 30 of 54