Date And Time; Set Date And Time; U.s. Daylight Savings Time - Proliphix NT10e Configuration Manual

Rev 2.0
Figure 16b – General Settings Page (Alarms and Alerts Pending)

Date and Time

Set Date and Time

This field is automatically filled with the date and time of the web browser. Unaltered, this
date and time can be assigned to the thermostat by first checking the "Set Thermostat
Time" checkbox and issuing a "Submit". If a different date and time is desired, the date
and time field can be changed prior to setting the "Set Thermostat Time" checkbox and
issuing a "Submit". (The date and time of the thermostat can be read directly at the
thermostat on the Thermostat Status sub-screen under the Status & Control LCD screen.)

U.S. Daylight Savings Time

Contains the state of whether or not the thermostat should adhere to the United States
Daylight Savings program, while maintaining date and time. US Daylight Savings Time (US
DST) stipulates that the time shall be set ahead an hour at the end of the first Saturday of
the month of April every year. In addition, the time shall be set back an hour at the end of
the last Saturday of the month of October every year. If this checkbox is checked, US DST
will be observed and set in the thermostat when the "Submit" button is pressed.
Page 31 of 54