Hold Mode; Schedule Settings; Day Class / Period; Cool - Proliphix NT10e Configuration Manual

Rev 2.0
Status and Control:
o
45

Hold Mode

Holds the current temperature of both the Heat and Cool Settings at the current settings
indefinitely.
Status and Control:
Off (default) – Hold mode is disabled.
Hold – Hold mode is enabled.

Schedule Settings

Day Class / Period

Displays the current settings for both the scheduled Day Class and Period. (See Day Class
Schedules)
Status:
Day Class – Home, Out and Away
Period – Morn(ing), Day, Eve(ning), Sleep

Cool

Current Cool temperature setting as set within the current Day Class schedule. (See Day
Class Schedules)
Status:
o
45

Heat

Current Heat temperature setting as set within the current Day Class schedule. (See Day
Class Schedules)
Status:
o
45

HVAC Settings

HVAC State

Displays the current state of the Heating or Cooling system. If a state change is made while
viewing this page, pressing the Refresh will update this status.
Status :
Heat On
Aux Ht
Cool On
Off

HVAC Mode

Displays and controls the current mode setting for the HVAC system. The thermostat can
be configured to control the heat system only, cool system only, automatically changeover
between heating and cooling systems or control neither system.
Status and Control:
Heat – Heating system only
Cool – Cooling system only
Auto – Automatic changeover between heating and cooling systems
Off - The thermostat is disabled from controlling either the Heating or Cooling system.
o
F to 95 F
o
F to 95 F
o
F to 95 F
– Heating system is actively heating.
- First stage and auxilary heat are actively heating. (Heat Pump)
– Cooling system is actively cooling.
– Neither the heating system or cooling system is active (i.e. on).
Page 26 of 54