Thermostat Device Interface; Buttons And Screens - Proliphix NT10e Configuration Manual

Rev 2.0

Thermostat Device Interface

The Proliphix thermostat features a convenient method of manually modifying certain parameters directly at
the thermostat. The thermostat's front panel includes up and down arrows and several buttons located at
the bottom of the LCD to select the desired configuration settings. The following sections detail the
operation of the thermostat from the thermostat's buttons and LCD screens.

Buttons and Screens

The basic layout of all thermostat buttons and a typical LCD screen are shown below in Figure 1.
Button Definitions
U – Up Arrow (multiple uses, screen sensitive)
- Increases the setpoint temperature settings
- Scrolls up one field in multi-field screens
D – Down Arrow (multiple uses, screen sensitive)
- Decreases the setpoint temperature settings
- Scrolls down one field in multi-field screens
L – Left Button (multiple uses, screen sensitive)
- Selects the function as defined in the Button Field above it.
M – Middle Button (multiple uses, screen sensitive)
- Selects the function as defined in the Button Field above it.
R – Right Button (multiple uses, screen sensitive)
- Selects the function as defined in the Button Field above it.
Field Definitions
1 – Left Button Field
- Defines the function to be controlled by the Left button. In many screens this is labeled "Prev"
and allows for access back to the previous screen.
2 – Middle Button Field
- Defines the function to be controlled by the Middle button. In many secondary screens this is
labeled "Select" and allows for slection of the currently highlighted field on the screen.
3 – Right Button Field
- Defines the function to be controlled by the Right button. In many screens this is labeled
"Next" and allows for access to the next screen.
.
LCD Screen
1
2
Figure 1 - Thermostat Interface
Page 8 of 54
U
D
3