Ip Address; Subnet Mask; Gateway Address; Web Server - Proliphix NT10e Configuration Manual

Rev 2.0
Static – IP address is manually assigned by the user.

IP Address

This field contains the unique Internet Protocol address either assigned statically or by
DHCP. See IP Address Method above.
Status and Control:
A.B.C.D – Four field standard dot notation for IP address designation.

Subnet Mask

This field defines the IP subnet on which the thermostat IP address will be assigned. The
subnet can include 256, 65536 or 16772216 IP addresses.
Status and Control:
X.Y.Z.C – Class C address subnet. There can be 256 IP addresses in this subnet.
X.Y.B.B – Class B address subnet. There can be 65,536 IP addresses in this subnet.
X.A.A.A – Class A address subnet. There can be 16,772,216 IP addresses in this subnet.

Gateway Address

This field defines the IP address of the router which will act as a gateway for the
thermostats to communicate to other devices in another subnet. The thermostat uses this
address when it needs to communicate to the Proliphix Web Server for Remote
Management.
Status and Control:
A.B.C.D – Four field standard dot notation for IP address designation.

Web Server

HTTP Port

This field defines the IP port number required by the Proliphix Web Server for Remote
Management capability. The thermostat communicates with the Proliphix Web Server to
identify itself as an eligible remotely manageable thermostat. The Proliphix Web Server
returns the communication by responding to the thermostat through this HTTP Port in the
firewall router. This port number should be programmed into the local firewall router when
configuring inbound port forwarding. See the Remote Management User Guide.
After any of these fields are changed, a Software Reset is applied after the Submit button is pressed.
Page 43 of 54