Table of Contents
Advertisement
Rev 2.0
Low Temp Limit
-
Temperature below which an alarm indication is set by the thermostat.
o
o
High Temp Limit
-
Temperature above which an alarm indication is set by the thermostat.
o
o
Filter Change Alert
-
Indicates that the HVAC system requires service or the air handler filter need cleaning of
replacement.
o
o
Network Status Screen
The Network Status screen is a Secondary Screen which is a sub-screen of the Status & Control Screen.
The content of the Network Status Screen includes the thermostat Host name, the unique Ethernet Media
Access Control (MAC) address, the Internet Protocol (IP) address, and the Web Port number required for
remote management. (Refer to the TMI section below for further information on setting these parameters.)
See Figure 13 below.
OK – Temperature of thermostat has not dropped below that set as Low
Temperature Limit
Not OK - Temperature of thermostat has dropped below that set as Low
Temperature Limit
OK – Temperature of thermostat has not risen above that set as the High
Temperature Limit
Not OK - Temperature of thermostat has risen above that set as the High
Temperature Limit
OK – Maintenance is not required.
Now – Maintenance is reguired.
Screen 3.4
Network Status
Host:
Mac:
00:11:49:00:00:81
IP:
192.168.111.200
Web Port:
Figure 13 – Network Status Screen
Kitchen
Cool
8200
Back
Page 20 of 54
Advertisement
Table of Contents
