Remote Access; Figure 2-29 Network - Remote Access Page; Table 2-12 Network - Remote Access Field Descriptions - Proliphix IMT550c Configuration Manual

CHAPTER 2: Configuring the Thermostat Using the Web Interface

Remote Access

The Network - Remote Access page displays the remote access information.

Figure 2-29 Network - Remote Access Page

Use

Table 2-12 Network - Remote Access Field Descriptions

Field
Software Update Source
Server Address
Port Number
2-40
Table 2-12 to configure the Remote Access fields.
Internet Managed Thermostat Configuration Guide, Release 1.0
Beta Draft Confidential
Description
Enter the IP address of the Remote Server for software updates.
Note that this field is pre-configured at the factory with
uem.proliphix.com.
Enter the outgoing IP port number which is used to communicate
to the remote server. This field is pre-configured at the factory
with the IP port number of the Proliphix Web Server. Do not
change this value.
85 – (default) Port number of the remote server.
Part No. 600-03001-550, Rev. 1