Sensor Status Screen - Proliphix NT10e Configuration Manual

Rev 2.0

Sensor Status Screen

The Second Primary Screen is viewable in the NT20e model only if remote sensors are installed and
enabled. Because the NT10e does not support external thermal sensors, this page is NOT shown on
the NT10e Network Thermostat.
Field Definitions – Sensor Status
Zone Average
- Average temperature of any combination of Local, Remote Sensor #1 (e.g. Family Room), and
Remote Sensor #2 (e.g. Dining Room). See TMI
Local Temp
- Current temperature of the sensor within the thermostat.
Remote Sensor #1 (e.g. Family Room)
- Current temperature of Remote Sensor #1.
Remote Sensor #2 (e.g. Dining Room)
- Current temperature of Remote Sensor #2.
Screen 2.0
Sensor Status
Zone Average
Local Temp
Family Room
Dining Room
Prev
Figure 8 - Sensor Status Screen
72.6
Cool
72.3
71.6
73.9
Next
Page 15 of 54