Sensor Status Screen; Table 2-4 Sensor Status Screen Options - Proliphix Professional NT100e/h Configuration Manual

Beta Draft Confidential

Sensor Status Screen

The Sensor Status screen is a secondary screen on the NT120e/h, NT130e/h,
NT150e/h, and NT160e/h models (if remote sensors are installed and enabled) and the
second primary screen if remote sensors are disabled.
The NT100e/h does not support external thermal sensors, therefore this screen is
not available on the NT100e/h Network Thermostat.
Note
Figure 2-6 NT120e/h and NT130e/h Sensor Status Screens
Figure 2-7 NT150e/h and NT160e/h Sensor Status Screens
Table 2-4

Table 2-4 Sensor Status Screen Options

Field
Zone Average
Rel Humidity
(NT150e/h and NT160e/h only)
Local
East Entry (e.g. RS #1)
West Entry (e.g. RS #2)
Professional Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-200, Rev. 2
lists the sensor status screen display options.
Displays
Average temperature of any combination of Local, Remote Sensor
#1 (e.g. East Entry), and Remote Sensor #2 (e.g. West Entry).
Percentage of relative humidity as sensed internal to the
thermostat.
Current temperature of the sensor within the thermostat.
Current temperature of Remote Sensor #1.
Current temperature of Remote Sensor #2.
Thermostat Screen
2-9