Feed Adjustment - Epson Stylus PRO 7500 Service Manual
Color large format inkjet printer
Hide thumbs
Also See for Stylus PRO 7500:
- Reference manual (184 pages) ,
- Startup manual (76 pages) ,
- Assembly and setup instructions (36 pages)
Table of Contents
Advertisement
EPSON Stylus Pro 7500
FEED ADJUSTMENT
This function adjusts the distance the printer feeds paper by correcting the printer's
distance-measurement setting.
1.
Make sure "Adj. Feed" appears in the LCD, and press the Enter button.
2.
The printer prints a check pattern (lines) while feeding the paper at a fixed distance.
3.
After the pattern is printed, "V Length 1000.0mm" appears. Using a regular ruler (and
the Scale Stopper, code number 1047746/1047745), measure the printed pattern from
the top line to the bottom line. Then enter this measurement using the item select +/-
buttons in 0.1mm increments.
4.
After entering the measurement, press the Enter button to finish.
Figure 5-33. Feed Distance Check Operation
Adjustment
Figure 5-34. Feed Distance Check Pattern
The center printed pattern in the above patterns serves the role of a
supplementary line for measuring with the ruler.
Adjustment Steps
Revision A
205
Advertisement
Table of Contents
Troubleshooting
