Bi-D #4 Adjustment Check Pattern; Required Materials; Operating Environment And Preliminary Preparations - Epson Stylus PRO 7500 Service Manual

EPSON Stylus Pro 7500

5.2.8 Bi-D #4 Adjustment Check Pattern

This function Carries out printing of a pattern to check the results of adjustments to Bi-D
adjustment pattern No. 4, carried out via the printer's control panel.

REQUIRED MATERIALS

o
Stylus Pro 7500 Service Adjustment Program
o
PC with a Windows 95/98 environment, parallel interface cable
OPERATING ENVIRONMENT AND PRELIMINARY
PREPARATIONS
1. Click Set.exe in Program Disk 1 and install the program.
2. Install Disk 2 in accordance with the procedure instructed on the display.
BI-D #4 ADJUSTMENT CHECK PATTERN
1. Turn on the printer's power switch and check the following 3 points.
n
Check if the printer is in the print ready state.
n
Check if the parallel interface cable is connected between the PC and the printer.
n
MC thick mat paper should be set in the printer.
2. start the MC-7500 adjustment program, select the model name and the name of the port
used, then click the OK button.
Adjustment
Figure 5-61. Selecting the Model Name and Connection Port
3. If "Bi-D #4 Adjustment Check Pattern" is selected in the main menu, the following
screen is displayed.
Figure 5-62. Bi-D #4 Adjustment Check Pattern
4. If you click the OK button, the Bi-D #4 adjustment check pattern is printed.
Adjustment Steps
Revision A
233