Epson Stylus PRO 7500 Service Manual page 108

EPSON Stylus Pro 7500
4.2.1.8 Roll Paper Cover Removal
1. Open the Roll Paper Cover.
2. Remove two white screws (CPS:M4x8) securing the black spindle support on the left,
and then remove the spindle support.
3. Remove two white screws (CPS:M4x8) securing the gray spindle support on the right,
and then remove the spindle support.
4. Remove the cover brake pin from either the left or right side, and remove the cover.
Disassembly & Assembly
screws
(CPS:M4x8)
Figure 4-20. Roll Paper Cover removal on right side
roll paper cover
brake pin
spindle support
Figure 4-21. Roll Paper Cover removal on left side
Disassembly Flow
Revision A
roll paper cover
brake pin
spindle support
screws
(CPS:M4x8)
108