Epson Stylus PRO 7500 Service Manual page 107

EPSON Stylus Pro 7500
4.2.1.7 Paper Guide L2 Removal
1. From the front, remove four white screws (Truss:M4x6), and remove the Paper Guide
L2.
paper guide L2
Figure 4-17. Paper Guide L2 removal on right side
screws
(Truss:M4x6)
Figure 4-18. Paper Guide L2 removal on left side
Disassembly & Assembly
screws
(Truss:M4x6)
paper guide L2
Disassembly Flow
Assemble the paper guide L2 using the following assembly procedure.
1. Fit all five of the projections on the paper guide L2 in the notches
(5 notches) in the cushion tape on the paper guide L. (See the
figure below.)
2. Fasten the paper guide L2 using 4 screws.
paper guide L
paper guide L2
notches
Figure 4-19. Paper Guide L2 assembly
Revision A
107